Industrial Threaded Products
ProductsAboutRequest Quote Contact Us
Anchors
-
Pipe Guides & Slides
53a1aced41d34bac1092f9f7_anchor_system-fig255.jpg
Pipe Alignment Guide (Single Spider Clamp) – Fig. 255
Material: Carbon steel, also available in 304 and 316 stainless steel.
Finish: Plain, electro-galvanized, or painted.
Service: Designed for use with insulated or non-insulated pipe lines to maintain...
Approvals: There are no approval options for this product.
Ordering: Specify pipe size, insulation thickness, figure number and size number.
Notes: There are no notes for this product.
53a1add164a4f9aa1001d57e_anchor_system-fig256.jpg
Pipe Alignment Guide – Fig. 256
Material: Carbon steel, also available in 304 and 316 stainless steel.
Finish: Plain, electro-galvanized or painted.
Service: Designed for use with insulated or non-insulated pipe lines to maintain...
Approvals: There are no approval options for this product.
Ordering: Specify pipe size, insulation thickness, figure number and size number.
Notes: There are no notes for this product.
53a1ae7251e756e8281a5d4c_anchor_system-fig4000_type_a.jpg
Pipe Slide Tee – Fig. 4000 (Type A)
Material: Carbon steel tee with or without PTFE slide pad, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Designed for the support of pipe where horizontal movement may occur due...
Approvals: Complies with Federal Specification A-A-1192 A (Type# 35) and...
Ordering: Specify pipe size, figure number, type, finish and pipe clamp figure number...
Notes: Designed to minimize heat loss through tee. Tee without PTFE to be used as a...
53a1ae7251e756e8281a5d4c_anchor_system-fig4000_type_a.jpg
Pipe Slide Tee – Fig. 4000 (Type B)
Material: Carbon steel tee with or without PTFE slide pad, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Designed for the support of pipe where horizontal movement may occur due...
Approvals: Complies with Federal Specification A-A-1192 A (Type# 35) and...
Ordering: Specify pipe size, figure number, type, finish and pipe clamp figure number...
Notes: Designed to minimize heat loss through tee. Tee without PTFE to be used as...
53a1b02051e756e8281a5d8f_anchor_system-fig4000_type_c.jpg
Pipe Slide Tee – Fig. 4000 (Type C)
Material: Carbon steel tee with or without PTFE slide pad, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Designed for the support of pipe where horizontal movement may occur due...
Approvals: Complies with Federal Specification A-A-1192 A (Type# 35) and...
Ordering: Specify pipe size, figure number, type, finish and pipe clamp figure number...
Notes: Designed to minimize heat loss through tee. Tee without PTFE to be used as...
53a1b0ee64a4f9aa1001d616_anchor_system-fig4100_type_a.jpg
Slide Plates – Fig. 4100 (Type A)
Material: Carbon steel, PTFE bonded base, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Base support for pipe slides. Wider and longer pads can be furnished for...
Approvals: There are no approval options for this product.
Ordering: Specify figure number, type and size
Notes: There are no notes for this product.
53a1b17e64a4f9aa1001d620_anchor_system-fig4100_type_b.jpg
Slide Plates – Fig. 4100 (Type B)
Material: Carbon steel, PTFE bonded base, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Supports pie slides where only axial movement is allowed. Acts as...
Approvals: There are no approval options for this product.
Ordering: Specify figure number, type and size. Indicate if bolt holes are required.
Notes: There are no notes for this product.
53a1b21064a4f9aa1001d62a_anchor_system-fig4100_type_c.jpg
Slide Plates – Fig. 4100 (Type C)
Material: Carbon steel, PTFE bonded base, also available in 304 and 316 stainless steel.
Finish: Plain, galvanized or painted.
Service: Supports pipe slide where horizontal movement on one plane is...
Approvals: There are no approval options for this product.
Ordering: Specify figure number, type and size. Indicate if bolt holes are required.
Notes: There are no notes for this product.
HOMEPRODUCTSABOUTREQUEST QUOTECONTACT USSITEMAP GET DIRECTIONSDOWNLOAD PRODUCT CATALOG
facebook
facebook
google
google

All Rights Reserved. Copyright 2017 Industrial Threaded Products
777 Mount Ave Wyandanch, NY 11798 Tel: (631) 665-9300 Fax: (631) 491-0897