Plain, pre-galvanized
10’ or 20’ Other lengths available
- Loading data was calculated in a concrete mixture which was proportioned so that the compression strength of the concrete was 2,500 to 3,000 pounds per square inch and that the load is dependent on the surrounding concrete.
- Tests were performed with a safety factor of 3, and in accordance with the MFMA Specifications.
- Concrete inserts are supplied with an end cap and either a styrofoam filler or plastic strip installed in the insert channel to prevent concrete seepage.
- Inserts should be secured to forms at 16” intervals
- When ordering, please indicate finish and either foam filler, or plastic closure.
